Thread, explained in plain terms
A low-power, IP-based mesh networking protocol for smart-home devices, used as one of the transports beneath Matter.
Thread is a wireless networking protocol built for small, low-power devices such as door sensors, bulbs and thermostats. Each device can pass messages along for its neighbours, so the network forms a mesh and can route around a dead node rather than failing. Because Thread uses IP, its devices are addressed like any other device on a network, with no special translation of their messages.
It runs on the 802.15.4 radio in the 2.4 GHz band, the same radio that Zigbee uses. The two share hardware but are different protocols and do not talk to each other directly. Mains-powered devices usually act as routers, while battery sensors sleep most of the time and wake to report.
A Thread network reaches the rest of the home through a border router, a device that links it to Wi-Fi or Ethernet. On its own, Thread does not give you smart-home control. It is a transport. The first specification appeared in 2015, several years before Matter, which is now the application layer most often run over it. Thread handles its own routing, and a single network has at most 32 active routers, with the remaining devices attached to one of them.
Anyone choosing between radios will find the home automation protocols guide useful, and the Matter and Thread guide shows how the two fit together.